+8616638320060
Mobile:+8616638320060
Fax: 0086 0372 3996648
Email: joanna@aykxgj.com
Particle size requirements for inoculants
What are the requirements for inoculant particle size? Anyang Yucheng Xin ferroalloy to introduce to you:
The particle size of the inoculant should not be too fine or too coarse. If the particles are too coarse, they cannot be dissolved and absorbed by the molten iron relatively quickly, and the residual insoluble inoculant particles mixed into the casting will deteriorate the performance or lead to scrapping. The particle size should not be too fine, and the powder-like inoculant is very easy to oxidize and burn, lose the inoculation effect, and cause casting slag. For the ferrosilicon inoculant containing 75% Si, the 0.5T molten iron is treated by the flushing method, and when the molten iron temperature is 1390~1450 °C, the particle size of the inoculant is 1~3mm. If the amount of molten iron is small or the temperature is low or the instantaneous incubation method is used, the particle size is 0.2 to 2 mm.
The above are some suggestions from Kangxin International Metallurgy, I hope to help you!